Attenzione, JavaScript disabilitato! È necessario abilitare JavaScript nelle impostazioni del browser per poter fruire correttamente questo sito web.

D Series

Helical gear units, their input and output shafts are parallel and they can be connected to machines from sides of housing, with torque arm or from output flange.

Motor Power
[kW]
Torque
[Nm]
Output Speed
[rpm]
0,12 - 160130 - 180000,1 - 580
Features
  • Monoblock housing design
  • Two or three stages can be in same housing
  • Additional reduction stages available upon request
  • Bearing solutions for high radial and axial loads
  • Output shaft options (Hollow shaft, solid shaft, shrink disk, hollow and solid splines)
  • Extruder output option for extruder machines (DRE Type)
Double click on the image to zoom Drag to rotate

D Series

Helical gear units, their input and output shafts are parallel and they can be connected to machines from sides of housing, with torque arm or from output flange.

Motor Power
[kW]
Torque
[Nm]
Output Speed
[rpm]
0,12 - 160130 - 180000,1 - 580
Features
  • Monoblock housing design
  • Two or three stages can be in same housing
  • Additional reduction stages available upon request
  • Bearing solutions for high radial and axial loads
  • Output shaft options (Hollow shaft, solid shaft, shrink disk, hollow and solid splines)
  • Extruder output option for extruder machines (DRE Type)
SizeRatioNominal Torque
[Nm]
D07...6 - 180150
D17...5 - 143200
D27...5 - 1.189450
D28...4 -3.800600
D37...4 - 4.820820
D47...4 - 6.1361.550
D57...4 - 10.1473.000
D67...4 -9.5084.300
D77...4 - 24.9638.000
D87...6 - 17.98913.000
D97...7 - 20.56618.000

M/N Series

Foot/Flange-mounted, helical gear units with solid output shaft, Input and output shafts are parallel to each other.

Motor Power
[kW]
Torque
[Nm]
Output Speed
[rpm]
0,12 - 16050 - 18.0000,1 - 780
Features
  • Monoblock housing design
  • Two or three stages can be in same housing
  • Additional reduction stages available upon request
  • Bearing solutions for high radial and axial loads
  • Output shaft options

Double click on the image to zoom Drag to rotate

M/N Series

Foot/Flange-mounted, helical gear units with solid output shaft, Input and output shafts are parallel to each other.

Motor Power
[kW]
Torque
[Nm]
Output Speed
[rpm]
0,12 - 16050 - 18.0000,1 - 780
Features
  • Monoblock housing design
  • Two or three stages can be in same housing
  • Additional reduction stages available upon request
  • Bearing solutions for high radial and axial loads
  • Output shaft options

SizeRatioNominal Torque
[Nm]
M/N 00...4 - 4582
M/N 10...4 - 51140
M/N 17...3 - 99200
M/N 20...4 - 68280
M/N 27...3 - 2.920450
M/N 28...3 - 3.215600
M/N 37...3 - 4.946820
M/N 47...3 - 7.4591.550
M/N 57...4 - 8.0923.000
M/N 67...3 - 17.4414.300
M/N 77...5 - 23.4648.000
M/N 87...4 - 17.50213.000
M/N 97...7 - 20.05218.000

K Series

Helical bevel gear units, their input and output shafts are perpendicular to each other. They can be mounted to machine from foot, output flange or with torquarm.

Motor Power
[kW]
Torque
[Nm]
Output Speed
[rpm]
0,12 - 9080 - 180000,1 - 460
Features
  • Monoblock housing design
  • Two or three stages can be in same housing
  • Additional reduction stages available upon request
  • Bearing solutions for high radial and axial loads
  • Output shaft options (Hollow shaft, solid shaft, shrink disk, hollow and solid splines)
  • Extruder output option for extruder machines (KRE Type)
Double click on the image to zoom Drag to rotate

K Series

Helical bevel gear units, their input and output shafts are perpendicular to each other. They can be mounted to machine from foot, output flange or with torquarm.

Motor Power
[kW]
Torque
[Nm]
Output Speed
[rpm]
0,12 - 9080 - 180000,1 - 460
Features
  • Monoblock housing design
  • Two or three stages can be in same housing
  • Additional reduction stages available upon request
  • Bearing solutions for high radial and axial loads
  • Output shaft options (Hollow shaft, solid shaft, shrink disk, hollow and solid splines)
  • Extruder output option for extruder machines (KRE Type)
SizeRatioNominal Torque
[Nm]
K 00...7 - 12180
K 10...6 - 129140
K 17...7 - 109200
K 20...5 - 139280
K 27...7 - 1.759450
K 28...6 - 3.500600
K 37...6 - 3.467820
K 47...6 - 5.2271.550
K 57...7 - 6.6122.700
K 67...8 - 12.6814.300
K 77...7 - 15.6198.000
K 87...10 - 12.78915.000
K 97...11 - 15.68020.000

E Series

The worm gearboxes of the E series feature input and output shafts that are perpendicular to each other.Their worms are made of steel and gears are made of bronze.They can be mounted to the driven machine by the foot, flange or torque arm on the gearbox.

Motor Power
[kW]
Torque
[Nm]
Output Speed
[rpm]
0,06 - 7,55 - 1.0000,2 - 260
Features
  • Maximum thermal capacity through optimized design of cooling fins
  • Additional helical gear stage for low output speeds
  • Bearing solutions for high radial and axial loads
  • Special motor flanges
Double click on the image to zoom Drag to rotate

E Series

The worm gearboxes of the E series feature input and output shafts that are perpendicular to each other.Their worms are made of steel and gears are made of bronze.They can be mounted to the driven machine by the foot, flange or torque arm on the gearbox.

Motor Power
[kW]
Torque
[Nm]
Output Speed
[rpm]
0,06 - 7,55 - 1.0000,2 - 260
Features
  • Maximum thermal capacity through optimized design of cooling fins
  • Additional helical gear stage for low output speeds
  • Bearing solutions for high radial and axial loads
  • Special motor flanges
SizeRatioNominal Torque
[Nm]
E.0305 - 8019
E.0408 - 10045
E.0507 - 10074
E.0637 - 100142
E.0758 - 100219
E.0808 - 110287
E.1008 - 107500
E.1257 - 107900

T Series

The TT Series gearboxes are helical-geared, two-staged, output-shaft-mounted units with a hollow output shaft and a monoblock housing. Housing material is GG20 cast iron and gears are made of high-quality case-hardened steel. They are mounted to the machine using torque support arms. Connection holes on the gear units are used for mounting. Supplied without motor, the units are belt-driven. When selecting gear units the overhung load acting on the input shaft must be checked against the permissible values on the performance tables according to input speed.

Torque Range
[Nm]
Output shaft [mm]
200 - 18.00030 - 125
Features
  • Monoblock housing design
  • Torque arm option
  • GG20 – GG22 cast iron housing
  • Backstop
  • Suitable for different mounting positions
Double click on the image to zoom Drag to rotate

T Series

The TT Series gearboxes are helical-geared, two-staged, output-shaft-mounted units with a hollow output shaft and a monoblock housing. Housing material is GG20 cast iron and gears are made of high-quality case-hardened steel. They are mounted to the machine using torque support arms. Connection holes on the gear units are used for mounting. Supplied without motor, the units are belt-driven. When selecting gear units the overhung load acting on the input shaft must be checked against the permissible values on the performance tables according to input speed.

Torque Range
[Nm]
Output shaft [mm]
200 - 18.00030 - 125
Features
  • Monoblock housing design
  • Torque arm option
  • GG20 – GG22 cast iron housing
  • Backstop
  • Suitable for different mounting positions
SizeRatio Range
[i]
Nominal Torque
[Nm]
T17from 5 to 30200
TT27from 5 to 30450
TT28from 5 to 29600
TT37from 4 to 28820
TT47from 5 to 301.550
TT57from 5 to 303.000
TT67from 5 to 314.300
TT77from 5 to 308.000
TT87from 5 to 3013.000
TT97from 6 to 3118.000

V Series

V series gear units are three stage, helical-geared hoist drum drive units. Input and output centre distances are as far apart as possible to allow the use of larger drums to achieve longer rope service life. The V series gear units are designed for higher ISO/FEM classes with longer gear face widths compared to other products of a similar size. The housing material is GGG40 spheroid cast iron and gears are made of high quality case-hardened steel. The gearboxes have a solid output shaft with spline according to DIN 5480 and are produced to various dimensions. V series gear units are designed for double-and single-speed brake motors. They are available in five different sizes with a load range from 0.5 to 50 tonnes.

Miminum Drum Diameter
[mm]
Max Tonnage
[Ton]
Falls
from 140 to 400from 2 to 504/1
Features
  • Wide speed range
  • Load range from 0.5 to 50 tonnes
  • Designed for double- and single-speed brake motors
  • Solid output shafts with spline according to DIN5480
  • GGG40 spheroid cast iron housings
  • Power panel can be mounted directly on the drive unit
  • Suitable for different mounting positions
Double click on the image to zoom Drag to rotate

V Series

V series gear units are three stage, helical-geared hoist drum drive units. Input and output centre distances are as far apart as possible to allow the use of larger drums to achieve longer rope service life. The V series gear units are designed for higher ISO/FEM classes with longer gear face widths compared to other products of a similar size. The housing material is GGG40 spheroid cast iron and gears are made of high quality case-hardened steel. The gearboxes have a solid output shaft with spline according to DIN 5480 and are produced to various dimensions. V series gear units are designed for double-and single-speed brake motors. They are available in five different sizes with a load range from 0.5 to 50 tonnes.

Miminum Drum Diameter
[mm]
Max Tonnage
[Ton]
Falls
from 140 to 400from 2 to 504/1
Features
  • Wide speed range
  • Load range from 0.5 to 50 tonnes
  • Designed for double- and single-speed brake motors
  • Solid output shafts with spline according to DIN5480
  • GGG40 spheroid cast iron housings
  • Power panel can be mounted directly on the drive unit
  • Suitable for different mounting positions
SizeMiminum Drum Diameter
[mm]
Max Tonnage
[Ton]
Falls
VR273.1K1402,04/1
VR373.1K1403,24/1
VR473.1K1706,34/1
VR573.1K26612,54/1
VR673.1K295 - 32520 - 254/1
VR773.1K320324/1
VR873.1K400504/1